High Quality for Allantoin Usp - Lanolin Anhydrous – Springchem
High Quality for Allantoin Usp - Lanolin Anhydrous – Springchem Detail:
Lanolin Anhydrous Parameters
Introduction:
| INCI | CAS# |
| Lanolin anhydrous | 8006-54-0 |
LANOLIN is a pale yellow, tenacious, unctuous substance obtained from the wool of sheep, having a faint but characteristic odor.Lanolin has the unique property of absorbing twice its own weight of water. Lanolin has the physical properties of increasing adhesion to dry skin, and forming protective films on the skin.
Specifications
| Melting point ºC 38-44ºC | 42 |
| Acid Value,mg KOH/g 1.5maximum | 1.1 |
| Saponification value mg KOH/g 92-104 | 95 |
| Iodine value 18-36 | 32 |
| Residue on ignition% ≤0.5 maximum | 0.4 |
| Water absorption :% | Ph EUR.1997 |
| Chloride value <0.08 | <0.035 |
| Colour by gardner 12maximum | 10 |
Package
50kg /drum, 200kg/drum, 190kg/drum
Period of validity
12month
Storage
under shady ,dry, and sealed conditions, fire prevention.
Lanolin Anhydrous Application
Lanolin is suggested for use in the following ：Baby preparations,Hair Protection ,Lipsticks,Paste Shampoos,Shave Cream,Sunscreens,Burn cream ，Hand Soap, Lip cream,Make-Up ,Pet Products,Hair Spray Plasticizer ,Protective Creams and Lotions. It is an extremely effective emollient in restoring and maintaining the all important 。hydration (moisture balance) of the stratum corneum, and so prevents drying and chapping of the skin. Equally important, it does not alter the skin’s normal transpiration. Lanolin has been shown to cause the water in the skin to build up to its normal level of 10-30%, by retarding without completely inhibiting trans-epidermal moisture loss.
Lanolin Anhydrous Certificate of Analysis
| Product name:Lanolin Anhydrous USP35 | ||||
| NO | Item | Specification | Test Results | |
| 1 | Appearance | The yellow wax form thing | Complies | |
| 2 | Melting point ºC | 36-44 | 42 | |
| 3 | Acid Value,mg KOH/g | ≤1. maximum | 0.7 | |
| 4 | Odor | odorless | Complies | |
| 5 | Iodine value | 18-36 | 33 | |
| 6 | Saponification value mg KOH/g | 92-105 | 102 | |
| 7 | Residue on ignition% | ≤0.15 | 0.08 | |
| 8 | Ammonia | Complies | Complies | |
| 9 | Chlorides | Complies | Complies | |
| 10 | Gardner Color | 10maximum | 7 | |
| 11 | Loss on drying:% | ≤0.25 | 0.15 | |
| 12 | Water absorption capacity | ≥200 | Complies | |
| 13 | Peroxide Value. | ≤20 maximum | 7.2 | |
| 14 | Paraffins: % | ≤1.0 maximum | Complies | |
| 15 | Water Absorption | Complies | Complies | |
| 16 | Water-soluble can oxide | Complies | Complies | |
| 17 | Alkalinity | Complies | Complies | |
| 18 | Foreign Substances(ppm) Total | ≤40 | Complies | |
| 19 | Foreign Substances(ppm )List | ≤10 | Complies | |
| Pesticide Residue Analysis (Reference) | ||||
| Alpha endosulfan | ≤10ppm | 0.01 ppm | ||
| Endrin | ≤10ppm | 0.01 ppm | ||
| O,p-DDT | ≤10ppm | 0.01 ppm | ||
| P,P-DDT | ≤10ppm | 0.01 ppm | ||
| O,p-TDE | ≤10ppm | 0.01 ppm | ||
| Carbophenothion sulfoxide | ≤10ppm | 0.02 ppm | ||
| TCBN | ≤10ppm | 0.03 ppm | ||
| Beta endosulfan | ≤10ppm | 0.02 ppm | ||
| Alpha BHC | ≤10ppm | 0.01 ppm | ||
| beta BHC | ≤10ppm | 0.01 ppm | ||
| Carbophenothion | ≤10ppm | 0.01 ppm | ||
| propetamphos | ≤10ppm | 0.01 ppm | ||
| ronnel | ≤10ppm | 0.02 ppm | ||
| dichlofenthion | ≤10ppm | 0.01 ppm | ||
| malathion | ≤10ppm | 0.01 ppm | ||
| heptachlor | ≤10ppm | 0.00 ppm | ||
| chlorpyrifos | ≤10ppm | 0.02 ppm | ||
| Aldrin | ≤10ppm | 0.01 ppm | ||
| Chlorfen vinphosZ | ≤10ppm | 0.00 ppm | ||
| Chlorfen vinphosE | ≤10ppm | 0.01 ppm | ||
| O,P-DDE | ≤10ppm | 0.02 ppm | ||
| Striphos | ≤10ppm | 0.02 ppm | ||
| dieldrin | ≤10ppm | 0.01 ppm | ||
| diazinon | ≤10ppm | 6.3 ppm | ||
| ethion | ≤10ppm | 4.1 ppm | ||
| Carbophenothion Sulfoue | ≤10ppm | 0.01 ppm | ||
| Hexachlorobenzene(HCB) | ≤10ppm | 0.01 ppm | ||
| Gamma hexachlorocyclohexane | ≤10ppm | 0.01 ppm | ||
| Methoxychlor | ≤10ppm | 0.01 ppm | ||
| P,P-DDE | ≤10ppm | 0.01 ppm | ||
| pirimiphos | ≤10ppm | 0.00 ppm | ||
| heptachlorepoxide | ≤10ppm | 0.00 ppm | ||
| bromophosvethyl | ≤10ppm | 0.00 ppm | ||
| P,P-TDE | ≤10ppm | 0.00 ppm | ||
Product detail pictures:
Related Product Guide:
Our aim is usually to give superior quality items at aggressive rates, and top-notch company to clients around the earth. We have been ISO9001, CE, and GS certified and strictly adhere to their good quality specifications for High Quality for Allantoin Usp - Lanolin Anhydrous – Springchem , The product will supply to all over the world, such as: Cancun, Spain, Hongkong, Furthermore, all of our items are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our goods, please don't hesitate to contact us. We will do our best to meet your needs.
By Katherine from Angola - 2017.02.28 14:19
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Doreen from Nigeria - 2018.12.28 15:18
